Stadium Seating
|
by
|
|
CR4
CR4 With high backrest, follows the UEFA /FIFA recommendations, for any kind of grandstands. Seat moulded by injection in stabilized high quality copolymer polypropylene. Shiny surface. Sealed around their entire perimeter to prevent dirt from accumulating inside the seats, and in turn making it easy to clean. Counts with central drainage. Light resistance: Additive anti-UV, UNE EN 13200/4. Resistance to severe public use (vandalism): UNE EN 12727:01- Adima certificates are available.
Fibreglass Brackets
Fibreglass Brackets made of polypropylene copolymer as well as 30% fibreglass load. This delivers many advantages as compared to metallic supports: material is 100% rustproof and it does not need to be galvanized. Recommended particularly for installation in rainy places with a high degree of salt in the air and dampness - for example, sports venues that are close to the sea. High resistance to considerable spectator use (as well as vandalism). Brackets with 5 fixing points between the seat and support and 3 anchoring points to the step.
A2
A2 Backless shell seat, for conventional and metallic grandstands (telescopic or demountable). Seat moulded by injection in stabilized high quality copolymer polypropylene. Shiny surface. Sealed around their entire perimeter to prevent dirt from accumulating inside the seats, and in turn making it easy to clean. Counts with central drainage. Light resistance: Additive anti-UV, UNE EN 13200/4. Resistance to severe public use (vandalism): UNE EN 12727:01. Single central anchoring point reinforced with a small steel plate. Curved front edge of 35 mm with right-angle base overlapping terrace front. Central drainage. With lumbar support.
|
AB
AB Tip up seat, designed for all kinds of sport facilities, VIP boxes, buildings that stage public shows, etc... The seat tips up by counterweight or spring action, through the optional track limitator.
|
Reinforcement beams in the swinging conjoint are manufactured by the injection of a material formed of polymeric matrix reinforced with fibreglass, which brings resistance and comfort to the end product. Chasis in steel profiles cold laminated S275, hot galvanised or cataphoretic coating, optional, oven painted.
|
Vanda Hong Kong Ltd - Unit D 2/F Golden Sun Centre 59 Bonham Strand West Sheung Wan Hong Kong
Tel : +852 2803 2191 Fax : +852 2858 9114 Email : [email protected]
